FINAL PROJECT - SEMESTER COMPILATION
Griselda Jevon
0353958
Bachelor of Fashion Design Technology (Hons) - Semester 6
DST63304 Garment Creation Technology 2
Lecturer: Brian Khoo
SEMESTER COMPILATION - WEEK 01 (21/04/2025) - WEEK 14 (21/07/2025)
---
Task 01: FINAL PROJECT PATTERN MANIPULATION
Week 01 - Week 04
Description: The students required to have their finalized design and prototypes. Pattern construction creativity
and innovation through the use of two-dimensional patterns based on measurements calculations,
appropriate blocks pattern/ CAD flat pattern making, draping, cut and sew to achieved fit pattern.
Requirements: Pattern construction, marking and cutting actual materials process. Sewing and Assembly.
The first week started off with our first session with Mr. Brian. We were introduced to the overall timeline of the module and we were expected to come in prepared, with our toiles, design lineup, fabric selections, and journal from Semester 5 ready to go from day one. Honestly, it was a bit of a wake-up call, but it helped shift everyone into work mode immediately.
We were reminded that all toiles for Assignment 1 are due by Week 4. I ended up making some design changes for Look 3, so I’ll have to resubmit the toile for that one. I started from scratch with pattern drafting. It was a lot of trial and error, especially getting the fit and silhouette right, but that’s part of the process.
).zip%20-%204.png)
Final Design Line Up
I consulted with the lecturers about the design construction and proceed to update my technical drawings and pattern drafting.
Look 4 - Technical Drawing
For Look 3, I decided to create a twin look to Look 1, applying the same fabric manipulation from the skirt (hand-sewn furrowing), but this time on a pair of male baggy pants. I began by drafting a pants base and went through several rounds of trial and error to get the exact oversized silhouette I want. Since the manipulation is quite heavy, I had to exaggerate the bagginess even more so the pants wouldn’t lose shape.
My first attempt didn’t work. The manipulation dragged the base down and made the pants appear more straight-cut than baggy. After redrafting the pants base and testing different versions in calico, I finally achieved the silhouette I had in mind.
First Attempt on Calico
First Attempt on Calico - Front
First Attempt on Calico - Back
Second Attempt on Calico - Pants Base
First Attempt (too oversized on model size)
For Look 4, I decided to design a blazer and pants set that connects conceptually to Look 2, where I explored body shape-inspired silhouettes. While Look 2 was based on the inverted triangle body shape, Look 4 takes inspiration from the oval body shape, which is softer, rounder, and fuller through the midsection.
I began by drafting a men’s bodice block for the blazer, making it cropped and baggier to reflect the silhouette I had in mind. I also designed the sleeves with a two-part lantern shape, an upper and lower section. When I tested the toile in calico, the result wasn’t bad, but something still felt off.
First Attempt on Calico - Lantern Sleeve
First Attempt on Calico - Lantern Sleeve
Second Attempt on Calico - 2 Piece Sleeve (too flat from sides)
After consulting with Mr. Brian, he pointed out that the blazer looked too oversized and suggested refining the silhouette. We also discussed the sleeve construction and agreed that dividing the sleeve vertically would be more effective than the lantern style. I then consulted with Kit about the blazer construction, and he advised me to add a side panel to the bodice using a tailored blazer method, which would help build more volume from the sides, aligning better with the oval body shape concept.
I applied all the feedback and redrafted the pattern before testing again in calico. The second version turned out so much better: the proportions felt more controlled, and the shape had more intention. The sleeve pattern took a few more trials to get the volume just right, but the whole process taught me so much about menswear construction, especially tailored blazers, which I haven’t had much experience with before.
Blazer Final Pattern - Bodice
Blazer Final Pattern - 3 Piece Sleeve
Demo on attaching a sleeve cigarette
Third Attempt on Calico - Bodice
Third Attempt on Calico - on Human Body
Third Attempt on Calico - 3 Piece Sleeve
Third Attempt on Calico - on Dummy
To complete the look, I created a pair of baggy pants with side pleats to enhance volume and give the silhouette a rounder, more oval-like shape. I started by using the base pants block from Look 3 and drafted the overall shape to match the vision I had: loose, comfortable, but still intentional. To add the pleats, I inserted an extra panel on both sides and curved the shape outward, which really helped build volume through the midsection. I kept the lower part of the pants slightly narrower but still baggy, so the fullness would stay concentrated in the middle.
There are also some adjustments for Look 1 and 2 after consulting with Mr. Brian.
Look 1: Adjusted the corset bra by adding more fabric on the sides, as it was too revealing. Change back zipper into lacing.
Look 2: Cut the back dart all the way from top to bottom, resulting in a total of 3 back pattern pieces. Added a 0.5 cm dart at the hip area for better shaping.
Look 1 Bra Top
Look 2 Back Dart Adjustment
Since we had a Public Holiday (Wesak Day) in Week 4, we submitted all our toiles and patterns in Week 5.
Task 02: FINAL PROJECT COMPLETE PATTERN MAKING
Week 04 - Week 08
Description: The students constructing finalizing designs garment from a pattern, altering and fitting garments
to improve their skills and ensure they meet the required competency standards. Create the
collections that reflect creativity and innovation through the use of advanced techniques achieved
through shape, color, silhouette, proportion and fabrication.
Requirements: Garment to be produce on actual Fabric. Checking the Fitting of the garment.
Starting on week 4 onwards, we are required to start on our actual garments since we finished our trial and error on calico. I started to buy fabrics after consulting, showing the fabric swatches, and got approved by Mr. Brian.
I started off with Look 1, focusing on constructing the corset and bra. For a cleaner finish, I used the same material for both the outer layer and the lining, so I cut every panel twice using the same fabric. To give the corset more structure, I inserted boning along the panel lines. I began by sewing the bra section first, then sandwiched it between the front corset and its lining. After sewing both the outer and inner parts together, I finished off the piece with hand-sewn details, making sure everything looked neat. The last step was marking where I wanted to place the eyelets for closure.
Look 1 - Bra Top
Look 1 - Bra & Skirt Base
Look 1 - Corset Panels
Look 1 - Corset Bra Sewn Together
Moving onto the skirt for Look 1, I started by cutting and sewing the base to get the foundation in place. Once the base was done, I began draping the fabric manipulation on top, carefully pinning and then tucking each section to create texture. After securing the manipulation, I finished the skirt with a zipper, added the facing, and completed it with a clean lining on the inside.
Look 1 - Draping Skirt onto the Base
Look 1 - Draping Skirt onto the Base
Look 1 - Skirt Facing
Lining for Look 1 Skirt
Look 1 - Corset Eyelets
Look 1 - Final Oucome Corset Top from the back
Look 1 - Try on
During the same weeks, I also began working on my Look 4 men's blazer and the inner stretchy top. I managed to complete the inner top and most of the blazer construction, leaving only the lining to be added later. By Week 8, we had a jury presentation where I showcased both Look 1 and Look 4, giving a glimpse of how the collection was coming together.
Task 03: FINAL PROJECT GARMENT FITTING
Week 08 - Week 14
Description: The students required to produce a fitted garment on actual fabric. Students may undergo the
process of few garment fittings before completing the garment finishing. Students also tasked to
transfer all pattern construction /draping result into working paper pattern. Students shall explore all
techniques learn to produce and sew on actual fabric to form the complete garment and ensure
they meet the required competency standards.
Requirements: Garment to be produce on actual Fabric. Checking the Fitting of the garment.
After the jury, I continued working on my garments, starting with Look 2. I began by cutting out each panel for the bodysuit and fusing them with jacket interfacing to give the structure I wanted. To build the bold shoulder silhouette, I used hard interfacing specifically on the shoulder areas and added two stacked shoulder pads on each side. Once the shape was in place, I finished the bodysuit with a front zipper and lining.
Look 2 - Try on model
To complete the look, I designed a legs accessories using the same lacing style as Look 1 to keep the collection visually cohesive.
Look 3 - Legs Accessories
Moving on to Look 3, I cut and sewed the pants base first, then applied the same hand-manipulation technique from the skirt to layer on top. This part took quite a bit of time, as I kept readjusting the draping until it matched my vision. Once satisfied, I secured the manipulations, added the zipper, and finished the pants with a lining.
Look 3 - Pants
Look 3 - Lining Material
At the same time, I decided to create two fitted ruched shirts using the same pattern and stretchy fabric, just in slightly different shades for Look 3 and Look 4. After buying the fabric, I cut and sewed both shirts using ruching techniques and finished them with french seams for a cleaner look.
Look 3&4 - Stretchy Mesh
Look 3 - Fitted Ruched Top Front
Look 3 - Fitted Ruched Top Back
Look 4 - Fitted Ruched Top Front
Look 4 - Fitted Ruched Top Back
The final piece I worked on was the Look 4 pants. I began by cutting all the panels and sewing the base together, then carefully tucked and secured the side pleats to maintain the volume and shape I wanted. After that, I attached the zipper, waistband, and belt loops, and finished with hemming the pants.
To complete the look, I went back to the blazer and added the lining, using the same fabric as the lining in Look 3 pants to maintain consistency within the collection. With that, Look 4 was finally complete.
Look 3 - Top & Pants
Look 4 - Blazer
Look 4 - Blazer Side View
Task 04: FINAL PROJECT FINISHED GARMENTS
Week 09 - Week 14
Description: Students required to complete finished 4 Looks. To complete adding embellishments or detailing to
complete and to ensure the overall well pressed.
Requirements: Final 4 Looks completed and presentable
Garment submitted in white garment bag with wooden hanger and name tag.
Complete Line Up Portfolio Link: click here
After completing all the garments, I wrapped up the project with a lookbook photoshoot to document and present the full collection. All final outcomes for each look, including front, side, and back views, are provided in the portfolio link above.
And finally, the semester concluded with our final presentation, where we showcased our complete project collections. It was such a relieving moment to see all the hard work come together, from concept development to finished garments, and to be able to share the journey with my classmates and lecturer.
---
).zip%20-%204.png)
Comments
Post a Comment